Top 7 Litecoin Wallets

After the Bitcoin, Litecoin is the world’s first cryptocurrency to exit. It is known as the first ever Altcoin. Meaning, it was launched with the aim of being the “silver” to Bitcoin's “gold,”. Compared to the Bitcoin, Litecoin is more easily obtainable and transactional. Being an alternative cryptocurrency based on the model of Bitcoin, Litecoin is also a peer-to-peer digital currency. It is a fully decentralized open source, global payment network.

Litecoin was developed with the aim to improve on Bitcoin's shortcomings and has earned industry support along with high trade volume and liquidity over the years. Due to its tremendous increase in value since its inception, it is vitally important to be aware of the best wallets capable of securing your Litecoin, to avoid loss of your cryptographic asset.

How Do I Identify Litecoin Wallet?

Unlike an actual wallet that you think of which holds money, a Litecoin wallet does not actually hold your digital assets. All assets are stored in the blockchain shared record, so that is why you don’t actually have to open your cryptocurrency wallet to accept digital assets.

Just like other digital assets, you have to sign every Litecoin transaction with your private key, and which gets stored in your wallet. Basically, opening a Litecoin wallet creates an address for you, with its own security key so that you can then use the key to complete Litecoin transactions. Even though Litecoins are not actually stored in a wallet they are still protected by its use. There are several different Litecoin wallets on offer, but which one is right for you?

The Litecoin wallets come in two basic forms:

  • Hardware wallet: They are also known as the cold wallets. They come in form of a small computer chip, capable of being connected to a computer via the USB port.
  • Software wallet: Depending on the platforms, there are several software Litecoin wallets around to choose from; mobile wallets, desktop wallets, and online Litecoin wallets.

We’re going to show you how each of these works. However, every user should always be vigilant of the following properties in selecting a wallet:

  • Ability to control your private keys
  • Compatibility with most widely used devices
  • Ease of use.
  • Provision of back-up and restore feature.


TREZOR

Trezor is a hardware Litecoin wallet in form of a USB dongle founded by SatoshiLabs. It is the world’s first cryptocurrency hardware wallet, and it currently supports ten digital currencies including Litecoin, allowing users to safely access their cryptocurrency even on insecure computers. It is an isolated environment for offline transaction signing and using a small display you can visually verify the transaction contents. That's why all operations using TREZOR are entirely safe.

The ultimate in ease of use and super high levels of security. Trezor keeps private keys on its device and signs transactions through hooking up via USB. Trezor lowers the risk of your private keys being discovered even if your PC is compromised by malware.

Although not the most practical wallet system for cold wallets and being on the go, but definitely the gold standard in what it does. It operates on a Zero Trust approach, which advocates for multiple layers of security to minimize the ways it can be compromised by a third party.

Trezor Includes Key Security Features:

  • PIN protection: Trezor is protected by a PIN code you choose. Each time you enter the wrong pin, the wait time until you can re-enter it increases by a power of two. And there’s no starting the timer over — you simply have to wait it out.
  • Recovery seed: Trezor provides you with a randomly generated 24-word code that you can use to recover your wallet if your Trezor is stolen or lost.
  • It allows you store your digital currencies on one device.
  • Trezor also has a secure admin SSH feature that allows users to protect the entry to their servers or website administration.
  • Make use of the next-generation password management application and easily synchronize your password to your private cloud.
  • Limited attack surface. Trezor limits its communication with other devices. It has no batteries, cameras for scanning, Bluetooth or Wi-Fi. When the USB device isn’t connected, it’s turned off.

Wallet Type:

  • Hardware

Compatibility:

  • Windows
  • Linux
  • Mac OS

Cryptocurrencies Supported:

  • Litecoin (LTC)
  • Ethereum (ETH)
  • Bitcoin (BTC)
  • Ethereum Classic (ETC)
  • Bitcoin Cash (BCH)
  • ERC-20 Tokens
  • Dash (DASH)
  • Dodge (DOGE)
  • Namecoin (NMC)
  • ZCash (ZEC)

WALLET SET-UP

1. Connect the device to your computer using the USB cable.

2. Go to My Trezor and download the chrome browser plugin here.

3. Once the plugin is activated, My Trezor will prompt you to choose a PIN. You don't actually type the PIN, you have to click on an obscured numerical pad displayed in the browser. The position of each number changes randomly, so every time you enter the PIN you will have to check your Trezor device for the layout. An attacker using a simple keylogger, or even an attacker with complete remote access to the desktop, would not be able to determine the numbers, as they are displayed only on the Trezor device.

4. Next, you have to write down a randomly generated sequence of 24 words, also known as a ‘seed’. This seed will allow you to reconstruct your Trezor wallet in case you lose the device. This is the only backup that can be used to recover your wallet in case of loss or theft.

Important: Never make a digital copy or recording or your recovery seed. It's a good idea to just use a pen and paper to note down your seed backup. Just remember to keep it somewhere safe.

HOW TO RECEIVE LITECOIN WITH YOUR TREZOR WALLET

1. Login to TREZOR.io. Go to the TREZOR.io website and connect your TREZOR Wallet to your computer. Input your PIN number onto the pop up (your PIN pad will show on your TREZOR device.

2. Navigate to Wallet and choose the Litecoin wallet. Select Litecoin Wallet from the dropdown at the top lefthand side of the screen. This dropdown will let you go to all of your different cryptocurrency wallets that your TREZOR wallet currently supports.

3. Copy the public address. Click the Receive tab next to Transactions at the top of the screen. You will see your Litecoin M-address next to the QR code. This address needs to be converted to the new address beginning with a “3”.  Copy the address beginning with an M and move on to the next step.

4. Obtain the SegWit address. Click on the M-address converter link to obtain SegWit address. As shown below, click on the link (third one down) to convert your M-address to the appropriate SegWit enabled address, and Copy this new address beginning with a “3”. Paste SegWit address as the destination address from your sending wallet and send.

SENDING LITECOIN FROM YOUR TREZOR

  1. Login to your Trezor account and navigate to the Litecoin wallet as descried above.
  2. Select the Send option
  3. Enter the transaction details including the address and the amount in LTC you’re sending
  4. Press send and enter your PIN
  5. Confirm the transaction on your Trezor

Note:

  • If the amount and the payment address are correct, press the right button on your Trezor to confirm. Else, if they are wrong, press ‘cancel’.
  • Once you have confirmed the destination address(es) and amount(s) of your Litecoin transaction, your Trezor will display the total amount of the transaction along with the transaction fee. Make sure they are correct before pressing confirm.


EXODUS

Description

Exodus has been around for a while and has built a solid reputation.  The interface is beautiful and the ability to exchange assets from within the wallet is great. The Exodus wallet is an excellent choice when you need a safe place to store one or more cryptocurrencies.  It is also possible to exchange them within the wallet, which is a nice bonus, thanks to its full compatibility with ShapeShift – a popular instant cryptocurrency exchange supporting a lot of digital assets.

Wallet Type:

  • Desktop Wallet.

Wallet Compatibility:

  • Windows
  • Linux
  • Mac OS

Cryptocurrencies Supported:

  • Bitcoin (BTC)
  • Gnosis (GNO)
  • Ethereum (ETH)
  • OmiseGo (OMG)
  • Litecoin (LTC)
  • Qtum (QTUM)
  • Dash (DASH)
  • Basic Attention Token (BAT)
  • Golem (GNT)
  • Civic (CVC)
  • Augur (REP)
  • SALT (SALT)
  • DeCred (DCR)
  • Ethereum Classic (ETC)
  • EOS (EOS)
  • FunFair (FUN)
  • Aragon (ANT)
  • District0x (DNT)

WALLET SET-UP:

1. Navigate to the Exodus website from your web browser

2. Click the “DOWNLOAD” button

3. Choose the operating system you will be installing this on (We are selecting Windows in this guide)

4. Run the downloaded Exodus .exe file. You should see the installation process as shown below.

5. Once it finishes installing, double click the shortcut it placed on your desktop, and you are good.

FUNDING YOUR WALLET:

1. To receive Litecoin (or any coin as the case may be), click on the RECEIVE button, and the address will be displayed to you as shown below:

2. Then, you need to copy the address (in grey) and paste it into the wallet from which you are sending to EXODUS.

SENDING LTC TO ANOTHER WALLET

  1. To send cryptocurrency funds, click the WALLET button on the left sidebar and select the asset you want to send. Enter the address of the recipient and click the SEND button
    1. Confirm the transaction from the dialog displayed on the screen.


ELECTRUM LIGHTWEIGHT CLIENT

Description:

Electrum-LTC is a lightweight Litecoin desktop wallet which doesn’t require you to download the entire blockchain or wait for synchronization. It is compatible with multiple operating systems. It is a cold wallet storage, in the sense that only you manage your private keys. Electrum is also an HD wallet providing its users ease of mind and security with a 12- word security seed key. It is also SegWit-enabled, and it provides an extra feature of FREEZING an address. One of Electrum’s core features is its integration with the major hardware wallets, such as TREZOR, KeepKey and Ledger Nano S. This means you can integrate Electrum with any of these premium hardware wallets.

Wallet Type:

  • Desktop and Mobile Wallet.

Wallet Compatibility:

  • Windows
  • Linux
  • Mac OS
  • Android
  • Major Litecoin Hardware Wallets.

Cryptocurrencies Supported:

  • Litecoin (LTC)

WALLET SET-UP

  1. To install Exodus, download the latest version from electrum.org and run it.

2. You will now undergo the wallet creation process. Use the default options in the first two screens and select Auto-connect and Standard wallet (for a more advanced setup with increased security, choose Wallet with two-factor authentication).

3. Connect to server

4. Create wallet. Next, Electrum will generate your wallet backup seed – a sequence of 12 words, which allows you to restore your wallet if something unforeseen happens to your device. You MUST keep the backup seed secure. Also, it is recommended to write it on a safe note.

5. Create new backup seed

6. Write down your backup seed. To make sure that you wrote down the backup seed correctly, you will be asked to re-enter the 12-word sequence.

7. Re-enter backup seed

8. Confirm seed. Next, you will be able to choose a password to encrypt your wallet. This password will help protect your Litecoin in case someone gains access to your computer or copies your wallet file. This password will NOT be required to restore the wallet from the backup seed, though.

9. Encryption password

10. Confirm encryption password. After choosing the password, the main Electrum window will open – you are done with setting up.

11. Main Electrum window. Using Electrum, you can specify the amount of transaction fees you want. You can do this by clicking on the Tools tab, Select Preferences

Tools > Preferences > Appearance

FUNDING YOUR WALLET

  1. To receive Litecoins into your wallets, make sure Electrum is online (green icon bottom right). Click Receive and copy the receiving address from your clipboard (there's a little blue icon for that at the right). Note, The Receiving address is your Litecoin wallets address.
  2. Go to the wallets from which you wish to send your Litecoin, click Send and Paste the address you copied from Electrum Specify the amount of LTC you want to send, click Continue. Confirm the 2-factor authentication and send.
  3. Upon receiving a payment, there will be a notification from the sending wallet confirming the transaction. Go back to Electrum and wait until it confirms the LTC has been received.

Note: To increase anonymity and improve security, you will be provided with a new Litecoin address each time you want to receive a transaction. Copy this address and paste it into the wallet from which you wish to send the LTC to your Electrum account.

SEND LTC FROM ELECTRUM

To send your LTC from Electrum, click on the Send tab, past the address of the receiving wallet into the space provided, insert the amount you are willing to send and click on the Send button.


LEDGER NANO S

Description

Ledger Nano S is a hardware wallet that supports Litecoin, it works based on robust safety features for storing cryptographic assets and securing digital payments. It connects to any computer (USB) and embeds a secure OLED display to double-check and confirm each transaction with a single tap on its side buttons.

Ledger Nano S works with the Ledger Manager application. This application is an account manager, where you can send and receive Litecoin transactions and check your balance.

The only way to open it is to connect your Nano S, make your PIN code and launch the Litecoin app on your device. Without the device, the app won't launch. For each sending transaction, your application will ask you to verify it on your device: your device will display the amount, recipient address and gas rate you will have to manually sign by confirming everything is alright on the device.

Wallet Type:

  • Hardware (USB PORT)

Wallet Compatibility:

  • Windows (7+)
  • Mac (10.8+)
  • Linux
  • Chrome OS (Requires Google Chrome or Chromium).

Runs With The Following Software Wallets:

  • Ledger Wallet Litecoin
  • MyEtherWallet
  • GreenBits
  • BitGo.

Cryptocurrencies Supported:

  • Litecoin (LTC)
  • Stratis
  • Ark (ARK)
  • Bitcoin Gold (BTG)
  • Fido U2F
  • Ripple (XRP)
  • Expanse (EXP)
  • Stellar (XLM)
  • Dogecoin (DOGE)
  • Hello (HGT)
  • Ubiq (UBQ)
  • HCash
  • Ethereum (ETH)
  • Bitcoin Cash (BCH)
  • PIVX (PIVX)
  • Digibyte (DGB)
  • ZCash (ZCH)
  • Komodo (KMD)
  • Verticoin (VTC)
  • QTUM (QTUM)
  • Dash (Dash)
  • Ethereum Classic (ETC)
  • NEO (NEO)
  • Bitcoin (BTC)
  • Posw Coin (POSW)
  • Stealthcoin (XST)

WALLET SET-UP

Device Configuration:

1. Navigate to start.ledgerwallet.com within your browser, and select the Ledger Nano S. Make sure you don’t accidentally select the older Nano.  And look at the pretty new Ledger Blue.

2. Next click on ‘Configure my device.’

3. Next, you’ll see a screen with multiple tabs, you’ll want to select the configuration one.

4. Plug in the Ledger Nano S into any USB port.  The Nano S should display ‘Welcome’ as shown below. Press both buttons to begin’.

5. Use left/right buttons to change values and navigate through multiple-choice lists. Press both buttons when you wish to confirm/continue or open an application. To begin configuration, press both buttons.

6. The next step is to pick a PIN code.  You can enter in anywhere from 4-8 numbers for your personal PIN, giving you the option to stop after 4 and go on to 8.

7. Next, the screen will tell you a recovery phrase is forthcoming for recovery of the wallet. The recovery phrase is made up of 24 words. Pressing both buttons will start the first word, with the right button taking you all the way through the last one.  Make sure to write them all down!  Use the included sheet or store it somewhere else for safe keeping.

8. Once you have the final word recorded, pressing both buttons will get you to here, to confirming your recovery phrase. This may take some time and word checking, as they will be checking exact words in proper sequence, so be patient.

9. Assuming you enter the words correctly, you will get a brief “Your device is now ready” screen and then this little check mark saying your device is good to go.

10. Pressing both buttons will further bring you to this screen. Next, download the Litecoin wallet from the Ledger website.

Litecoin Wallet Setup:

Install the Litecoin Application on Your Device Via The Ledger Manager

Ledger Manager is a Chrome extension. You can download it here like a free app store, from where you can make updates, install and uninstall applications on the Nano S. It doesn't manage your coins or launch your accounts applications.

  1. First, install the Ledger Manager (requires Chrome browser or Chromium), and launch it

  • Then connect your Nano S, enter your PIN, and stay on the dashboard. For each action made with the Ledger Manager, a confirmation will be required on your device as a signature.
  • Connect your Nano S or your Blue, enter your PIN, and stay on the dashboard.
  • Click on the green bottom arrow icon near the Litecoin logo

  • Confirm the installation when required on your device.
  • Quit the Ledger Manager
  • Once these apps are installed, open your Litecoin application on the device itself
  • Disable the “Browser support” setting of this Litecoin appLitecoin > Settings > Browser support
  • On the NANO S, scroll with the right button to find the “settings”, press both buttons to open them
  • Scroll with the right button to find the “browser support”, press both buttons to open it
  • Select NO by pressing both buttons to disable the browser support
  • Launch the Bitcoin Chrome app on the Chrome or Chromium browser on your computer
  • The wallet synchronizes and opens

Note:

The first two steps above are only required once. 

SENDING/RECEIVING FUND FROM/TO THE WALLET

  • Connect your Ledger device to the computer
  • Enter your PIN code
  • Open the Bitcoin application on your device
  • Launch your Bitcoin Chrome application on your computer
  • Click on “Send/Receive”, a popup window opens
  • Copy the “Litecoin address” which is displayed
  • Paste this address into the send/receiving address of the Litecoin wallet that currently holds your coins
  • Verify that you have the correct address as sending cryptocurrencies to the wrong address could result in the loss of the coins

Note:

For each sending transaction, the Ledger device will ask you to verify the details of your transaction (amount, fees, address) before confirming. Press right button on the Nano S.


KEEPKEY

Crypto-Hardware-Wallet-KeepKey-Ads-Support-to-ERC-20-Tokens

Description:

KeepKey is an HD wallet that allows you to generate and store an unlimited number of private keys. The wallet integrates with the wallet software on your computer by taking over private key generation, private key storage and transaction signing.

Compatibilty:

  • Operating systems: PC, Mac, Linux and Android
  • Software wallets: Works with Electrum, MultiBit and Mycelium.

Cryptocurrencies Supported:

  • Litecoin (LTC)
  • Ethereum (ETH)
  • Namecoin (NMC)
  • Dash (DASH)
  • Bitcoin (BTC)
  • Dogecoin (DOGE)

WALLET SET-UP

1. Download and install the KeepKey Client App from the Chrome web store here.

2. Open Chrome and paste this address “chrome://apps” in to the address bar to locate the KeepKey Client App

3. Connect Keepkey to your computer using the USB cable.

4. Upon launching of the KeepKey Client Chrome App on your computer, you will be prompted to initialize your KeepKey.

5. Select label for your Keepkey (this can be changed later). A label helps you distinguish your Keepkey in case you own multiple devices.

6. Select a PIN between 1-9 digits. (note: We recommend a PIN length of at least 6 digits) You will see a randomized, scrambled keypad on your KeepKey display. Find a number you want to choose, then click on the corresponding location in the KeepKey Client Chrome App.

7. KeepKey scrambled the PIN like this so that the connected computer never learns your PIN. It may seem confusing at first, but once you get comfortable with the PIN entry mechanism, you can use KeepKey on an untrusted computer without worrying that your PIN was discovered.

8. Confirm your PIN. (note: Keypad number placement is scrambled again, so you will need to examine KeepKey’s display once more to find the correct location for the PIN choice in the KeepKey Client Chrome App)

9. Write down the 12-word recovery sentence displayed on your device. This 12-word recovery sentence serves as the backup for your device, and you can use it to restore your funds if you lose access to your KeepKey. As you write down the sentence, carefully confirm that each word is written down correctly. You are only shown this sentence once, and it is very important that you have it written down correctly and in the correct order.

10. Keep the recovery sentence in a safe and secure place. You will need it to recover your account funds and private keys if your KeepKey is lost or stolen. Anyone who discovers your recovery sentence can access all of your funds.

FUNDING THE WALLET

  • Open the KeepKey Client App. Each time KeepKey is unplugged and plugged back in, you will need to authenticate your device by entering the PIN you chose during initialization.
  • If you have multiple accounts on your device, select the receiving account for the transaction.
  • Select the Litecoin Tile
  • Select “Receive Litecoin
  • Copy the receiving address by clicking the green clipboard icon.
  • Make sure that the address provided matches the address displayed on your KeepKey. This step ensures that the address does in fact belong to KeepKey.Note:Each time you initiate a transaction, KeepKey will provide you with an unused address to which you can send funds. Click on the green clipboard icon to copy the address to your clipboard. To generate more than one new address, click on the right arrow beside the QR code. This address can be given to anyone you require payment from. You can also send Litecoin to this address from an existing third-party wallet that belongs to you.Also, your KeepKey need not be connected to receive Litecoin, and you can feel free to save one or more addresses to use at a later date without having to connect your KeepKey.

TRANSFERING FUND FROM THE WALLET

  • Open the KeepKey client and enter your PIN
  • Select the LITECOIN Tile
  • Select “Send Litecoin”
  • Enter the recipient’s address
  • Enter the amount you wish to send and click send.
  • Verify the address and amount shown on the device.
  • Make sure address shown on device matches the address entered
  • Confirm and click the send button.


COINOMI

Description:

Coinomi is a great multi crypto online wallet that keeps your private keys securely on your device. At present, the wallet is only available on android devices.

Properties:

  • Security: Your private keys never leave your device. The wallet uses strong public cryptography and the best industry practices.. Using Coinomi wallet, your money is totally safe by ensuring that you have the ultimate control over it! Your wallet is encrypted with a master password making it very resistant against hackers and malicious software.
  • Enhanced Privacy: Coinomi favors privacy in a way that it doesn't perform any kind of association between your real-world identity and your wallet, your funds or even the way you spend or obtain them. No personal details ever go through Coinomi and spending your funds is totally anonymous as Coinomi hides your IP address from the rest of the world when pushing your transactions to the blockchain.
  • One-time Backup: All your coins are accessed with one Hierarchical Deterministic Wallet (BIP44), so instead of having to regularly back-up every wallet for every single coin, all you have to do is keep a simple phrase in a safe place (even on a piece of paper) only once! Never lose your funds ever again!
  • Versatile: Coinomi is the fastest and most convenient wallet when it comes to heterogeneous payments and cross-chain transactions. You can use your altcoins to pay directly to Litecoin addresses and vice versa! No intermediate stages, no sign-up required, spend your Litecoins to make any payment through a single-click process!
  • Exchange: Converting from one coin to another is ridiculously easy, only a few taps away and totally anonymous with the embedded ShapeShift integration. Change from one coin to another instantly and anonymously in an account-less manner. And the best part, there is little-to-no charge for using the ShapeShift for conversion!

Compatibility:

  • Android OS

Cryptocurrencies Supported:

  • Litecoin (LTC)
  • Abncoin (ABN)
  • Asiacoin (AC)
  • Betacoin (BETA)
  • Belacoin (BELA)
  • Litecoin Plus (XBC)
  • Blackcoin (BLK)
  • Britcoin (BRIT)
  • Canada Coin (CDN)
  • Cannacoin (CCN)
  • Clams (CLAM)
  • ClubCoin (CLUB)
  • Compucoin (CPN)
  • Dash (DASH)
  • Defcoin
  • Denarius (DNR)
  • Digibyte (DDG)
  • Digital Credits (DGCS)
  • Dogecoin (DOGE)
  • E-coin (ECN)
  • EDRCoin (EDRC)
  • E-Gulden (EFL)
  • Einstenium (EMC2)
  • Ethereum (ETH)
  • Ethereum Classic (ETC)
  • Expanse (EXP)
  • Feathercoin (FTC)
  • Flash (FLASH)
  • Game Credits (GAME)
  • Global Currency Reserve (GCR)
  • Gridcoin (GRID)
  • Gulden (NLG)
  • Hempcoin (THC)
  • Myriadcoin (XMY)
  • Peercoin (PPC)
  • Rubycoin (RBY)
  • Insane (INSN)
  • Namecoin (NMC)
  • Pesobit
  • ShadowCash (SDC)
  • Internet of people (IOP)
  • NavCoin (NAV)
  • Pinkcoin (PINK)
  • Smileycoin (SMLY)
  • IXCoin (IXC)
  • Neos Coin (NEOS)
  • PIVX (PIVX)
  • SolarCoin (SLR)
  • Landcoin (LDCN)
  • Neuro (NRO)
  • PoSW Coin (POSW)
  • Stratis (STRAT)
  • LBRT Credits (LBC)
  • NuBits (USNBT)
  • Potcoin (POT)
  • Syscoin (SYS)
  • Linx (LINX)
  • NuShares (NSR)
  • Putincoin (PUT)
  • Ultimate Secure Cash (USC)
  • Bitcoin (BTC)
  • OKCash (OK)
  • Reddcoin (RDD)
  • Unobtanium (UNO)
  • Monaco (MCO)
  • ParkByte (PKB)
  • Richcoin (RICHX)
  • Verge (XVG)
  • Vertcoin (VTC)
  • Vpncoin (VASH)
  • Zcash (ZEC)
  • Zcoin (XZC)

WALLET SET-UP

1. Click here to download the free android app on the PlayStore.

2. After the installation is complete, start the app. Tap on ‘Create a new wallet’ button if this is your first wallet with Coinomi.

3. In the next screen your recovery phrase will be displayed. Write down this recovery phrase on paper and store it in a safe place, otherwise you will be unable to recover your wallet. Once you have written it down, tap on the ‘I have safely stored my recovery phrase’ checkbox and tap the Next button.

4. In the next screen you will be asked to confirm your recovery phrase. Tap the words in the order that they appeared in your recover phrase. After you are done, tap on the Next button.

5. At the next screen you will be asked to enter a password for everyday use. After you are done, tap on the Next button.

6. You will be asked to select the coins for use with the wallet. Select Zcoin and any other coins that you wish to use. When done, tap on the Finish button.6. A Terms of Service will appear. Tap on Agree.7. Congratulations, you have set up your Coinomi wallet for use!

Note: You can as well follow the above steps to set-up the wallet for other coin. Just tap on the ‘+ COINS’ button and choose Litecoin from the list of coins provided and enter your password to confirm.

FUNDING THE WALLET

1. Tap on the RECIEVE TAB

2. Copy the address by clicking on the COPY ICON, icon, and paste the address to the sending walletSENDING FUND FROM THE WALLET

3. Tap on the SEND TAB

4. Paste the receiving address to the Address box

5. Specify the amount you are willing to send(in LTC or USD)

6. Click on the SEND BUTTON


LOAF WALLET

Description:

LoafWallet is the first standalone Litecoin Wallet built for Android and iOS devices with a focus on accessibility, security and simplicity. LoafWallet makes getting started with Litecoin easier than ever. It has made sending and receiving of Litecoin at the touch of a button, anytime, anywhere and to anyone.

Using LoafWallet, it’s easy to backup and recover your wallet on any device with the Recovery Phrase generated by the app. Even if you lose your phone you will not lose your Litecoin. LoafWallet gives you complete control over your coins. No server-backup stores your private keys behind the scene.

It has a simplified codebase which makes it quick, lightweight and responsive. Additional features, such as AES Hardware Encryption, App Sandboxing and keychain and code signatures helps protect your Litecoin and keeps it safe from malware and basic security flaws. You can connect directly to the Litecoin Network with simple payment verification – with no need to store the blockchain.

Compability:

  • Android
  • iOS

Cryptocurrencies Supported:

  • Litecoin (LTC) only

WALLET SET-UP

1. Download a free version of Android here or iOS wallet here. and launch the app.

2. Tap the Create New Wallet Button, Set a new pin.

3. Tap on the Write Down the Paper Key button, and write down the sequence of words on a secured (physical) note.

4. Enable the Finger print security function (if only supported by your mobile device)

TO RECEIVE LTC

Simply tap on the RECEIVE tab. Copy your address by long-tapping on the SHARE button. You can also press on the share button and share the address via SMS or E-mail. Enter your preferred amount, and press on the SEND button

TO SEND LTC

Simply tap on the SEND tab. Copy the receiving address and tap on paste as shown below. Enter your preferred amount, and press on the SEND button

[FREE] Get Our Best Crypto Trading, Mining & Investing Hacks:

*Action Required* Enter Your Email To Get Insight For Trending Coin News & Reviews

I will never give away, trade or sell your email address. You can unsubscribe at any time.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

5 × five =